MIL-DTL-16884N
APPENDIX A
HYDROPROCESSED SYNTHESIZED PARAFFINIC DIESEL (SPD)
A.1 SCOPE
A.1.1 Scope. This appendix defines hydroprocessed Synthesized Paraffinic Diesel (SPD) for use as a synthetic
blending component in marine diesel fuels. This appendix is a mandatory part of the specification. The information
contained herein is intended for compliance.
A.2 APPLICABLE DOCUMENTS
A.2.1 General. The documents listed in this section are specified in Appendix A of this specification. This
section does not include documents cited in other sections of this specification or recommended for additional
information or as examples. While every effort has been made to ensure the completeness of this list, document
users are cautioned that they must meet all specified requirements of documents cited in Appendix A of this
specification, whether or not they are listed.
A.2.2 Non-Government publications. The following documents form a part of this document to the extent
specified herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or
contract.
ASTM INTERNATIONAL
ASTM D86
-
Standard Test Method for Distillation of Petroleum Products at Atmospheric
Pressure
ASTM D93
-
Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester
ASTM D130
-
Standard Test Method for Corrosiveness to Copper from Petroleum Products by
Copper Strip Test
ASTM D189
-
Standard Test Method for Conradson Carbon Residue of Petroleum Products
ASTM D287
-
Standard Test Method for API Gravity of Crude Petroleum and Petroleum Products
(Hydrometer Method)
ASTM D445
-
Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids
(and Calculation of Dynamic Viscosity)
ASTM D524
-
Standard Test Method for Ramsbottom Carbon Residue of Petroleum Products
ASTM D664
-
Standard Test Method for Acid Number of Petroleum Products by Potentiometric
Titration
ASTM D974
-
Standard Test Method for Acid and Base Number by Color-Indicator Titration
ASTM D1298
-
Standard Test Method for Density, Relative Density, or API Gravity of Crude
Petroleum and Liquid Petroleum Products by Hydrometer Method
ASTM D2425
-
Standard Test Method for Hydrocarbon Types in Middle Distillates by Mass
Spectrometry
ASTM D2500
-
Standard Test Method for Cloud Point of Petroleum Products
ASTM D2622
-
Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive
X-ray Fluorescence Spectrometry
ASTM D3241
-
Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
ASTM D3828
-
Standard Test Methods for Flash Point by Small Scale Closed Cup Tester
12
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business